DigiPlus

Engine power failure (skills to solve the engine low power problem) The DigiPlusengine is the heart of the car, and only normal operation can ensure the reliability and performance of the vehicle. However, in the process of driving, the engine may be weak or underperforce, which will bring great inconvenience to driving. The following will introduce some tips to solve the problem of engine low power. Conventional exclusion method In the case of low engine power, the conventional exclusion method should be carried out first, such as checking the air.Whether the filter element, spark plug and fuel filter need to be replaced, or whether the vehicle has enough fuel, etc. These small problems may cause the engine to be underactive, so they should be checked carefully and replaced in time. Check the ignition system. The ignition system is the key to the normal operation of the engine. To solve the problem of engine low power, you must carefully check whether the ignition system is normal. If you find that there is a problem with the ignition system, you can try to replace the new ignition coil and ignition plug and make sure that the ignition is correct. In addition, it should also be checked whether the ignition cable is intact to ensure that the ignition system can operate normally. Check the fuel supply system. If the ignition system is normal, but the engine is still powerless, then there may be a problem with the fuel supply system. In this case, it is necessary to carefully check the working condition of the fuel injector and fuel pressure regulator and ensure that the fuel supply is stable.If there is a problem with the fuel supply system, it may be necessary to replace or clean components such as fuel injectors and fuel pressure regulators to ensure that the fuel supply is normal and stable. Checking oxygen sensors is the main means adopted in the engine control system at present. It can detect the oxygen content of exhaust gas emitted by the engine to help control fuel supply and reduce pollution. If there is a problem with the oxygen sensor, the oxygen content of the exhaust gas cannot be correctly detected, resulting in low engine power. Therefore, after excluding other possible causes, it is also necessary to check whether the oxygen sensor is working properly and replace it in time. Improving air circulation and engine air circulation is an important means to improve engine power and response speed. In the case of low engine power, it may be necessary to consider improving air circulation to improve engine performance. For example, canTo replace high-performance air filters and intake pipes, increase the air intake of the engine, and discharge the exhaust gas faster. This can improve the ventilation and heat dissipation of the engine, thus improving the output power of the engine. To sum up, low engine power is an inevitable problem in the operation of the vehicle. This problem can be effectively solved by conventional exclusion methods, checking the ignition system and fuel supply system, checking oxygen sensors, improving air circulation and other means. However, when carrying out these inspections and maintenance work, attention should also be paid to eliminating human factors, such as improper driving methods and untimely maintenance of the driver, to ensure the normal operation of the engine.

Contact Us
Phone：020-83484616