Arena Plus login

The Arena Plus loginreason for the high water temperature of the engine (explore the reason for the increase in the water temperature of the engine) With the increasing popularity of automobiles, the problem of high engine water temperature has also attracted more and more attention. Because many car owners can't grasp the enthusiasm of the train in time, the vehicle is damaged within a certain range. Therefore, it is becoming more and more important to find out the reason for the increase in engine water temperature. There are many reasons for the high water temperature of the engine. Next, we will introduce it in detail from the following aspects. 1. The radiator problem is that the radiator is a car engine.One of the most important components in the cooling system, its main function is to control the temperature of the car engine through natural cooling and forced cooling. When the radiator is working, water flows in from the inlet of the radiator. After generating heat through the heat exchanger, it continues to flow in the copper tube, thus radiating heat. Because the radiator is in a high-temperature state during the operation of the car engine, for a long time, the radiator is easily limited by collisions with other vehicles or the service life, resulting in water leakage in the pipeline and water tank. If you find that the radiator is leaking, it is recommended that you repair or replace it in time to avoid the failure of the vehicle. Two. Damaging the water pump is another important part of the automobile cooling system. Its main function is to form a liquid flow and supply water in all directions. When the pump is working, the liquid will flow into the water tank, continue to flow with the help of the motor, and smoothly enter the engine from the pump outlet.If the engine water temperature of the car is high, it is likely that the water pump is malfunctioning. For example, the pump seal is damaged, the bolt shakes and the pump gear breaks, etc. It is recommended that you check the vehicle in time when you encounter similar problems to avoid dangerous situations. 3. Too much heat generated by friction during the engine operation. The engine work of the car is caused by the chemical reaction between friction and heat. The vehicle is prone to generate a large amount of heat when driving, resulting in adverse reactions to electrical failures or other design components after long-term wear and tear. Therefore, after buying a new car, it is necessary to have a sufficient understanding of the use and maintenance of the vehicle according to the corresponding recommendation manual to prevent this from happening. Four. Insufficient coolant or aging coolant is responsible for supplying blood to the vehicle's engines to ensure that they remain in normal operation.If the coolant is damaged during transportation or use, the engine water temperature will rise. In addition, after the coolant life expires, it is recommended to replace the coolant to maintain a good state of vehicle function. 5. Strategic measures are not in place. In the process of driving the car, in order to ensure the normal operation of the engine, the owner needs to regularly observe the water temperature gauge of the vehicle, and abide by the relevant driving specifications, and do not drive at high speed for a long time and overload. If the car is in a high temperature state for a long time, it is easy to damage it. In a word, the problem of high engine water temperature is relatively common in the process of automobile transportation, but it is not an unsolvable problem. By understanding the above aspects and properly repairing the situation, the car can maintain good performance and safe operation.

Contact Us
Phone：020-83484616