DigiPlus fair value

Engine control unit deactivation: The DigiPlus fair valueonly way to repair the failure of the car. In the driving process of the car, the engine control unit (Engine Control Unit, EC U) is an indispensable and important component. It acts as the "brain" of the car, controlling the operation and performance of the engine to ensure the normal operation of the vehicle. However, if the ECU fails or is deactivated, the car will fail and cannot drive normally. At this time, the ECU needs to be repaired to restore the normal function of the car. This article will introduce the engine control unit, analyze the reasons and performance of ECU deactivation, and the process and method of repairing ECU. What is an engine control unit (ECU)?The engine control unit is one of the core components of the automotive electronic control system and an important part of the engine system. It is mainly composed of microprocessors, memory, AD/DA converters, sensors, etc., which can judge the operating status of the vehicle and control the operation of the engine. ECU can detect and monitor various engine parameters, such as speed, temperature, pressure, etc., and adjust the ignition timing, oil-gas ratio, oxygen sensor signal, etc. according to these parameters to ensure the efficient operation of the engine. Why is the ECU deactivated? Although ECU has highly intelligent and self-protective functions, long-term use or abnormal operation may also cause it to fail or deactivate. The following are the common reasons for ECU failure: 1. Insufficient or too high battery voltage: Unstable or too low battery voltage will affect the normal operation of the ECU, and there is a high possibility that the engine will fail due to deactivation.Two. Sensor or actuator failure: The ECU can obtain various parameters of the engine through the sensor, but if the sensor fails, it will lead to the ECU's misjudgment, resulting in deactivation. 3. Aging or damage of electronic components: After long-term use or some external damage, the electronic components in the ECU are more likely to age or be damaged, which is also one of the reasons for the deactivation of the ECU. Performance of ECU deactivation When the ECU fails or is deactivated, the car will have various different fault performance. The following are the common ECU deactivation performance: 1. The vehicle cannot be started or the motor turns off immediately after starting. Two. There are situations where the engine output power decreases, stalls or cannot accelerate. 3. There is a strange noise in the car or the engine shakes. Four. There is a fault indicator light on the dashboard, such as the engine fault light on.5. The car can't be restarted after parking. How to repair the ECU failure of the repair process and method of ECU deactivation? The following is an introduction to the general repair process and method: 1. Fault diagnosis: First of all, it is necessary to troubleshoot the ECU through the car computer diagnostic tool to find the exact cause of the fault. Two. Replace the faulty parts: After diagnosis, it is confirmed that the engine control unit is faulty, and the faulty parts need to be replaced, such as replacing the control module, sensor, line, etc. 3. Upgrade brush writing: For some software failures, it can be repaired by ECU upgrade brush writing. Connect the ECU through the computer and directly upgrade the ECU program to the latest version to avoid problems. Four. Reprogramming: ECU may face the problem of reprogramming after suffering a battery power outage or replacing the control module.Reprogramming requires processes such as vehicle calibration and calibration, and the replaced ECU can only work normally. 5. Other repair methods: For some more complex failures, such as severely damaged circuit boards, it may be necessary to repair the damaged parts or replace the entire ECU. Summarize that the engine control unit, as one of the core components of the automotive electronic control system, plays an important role in the normal operation of the automobile. When the ECU fails or is deactivated, it will cause the car to fail. Professional automobile fault diagnosis and repair tools and methods should be adopted to find the cause of the failure, repair the ECU in time, and ensure the normal operation of the automobile.

Contact Us
Phone：020-83484616