Bingo Plus

List of contents of this article:

• 1, How to set up the system disk on the solid-state drive?
• 2、 Do I have to reinstall the system after installing a solid-state drive on the computer?
• 3, How to install the system on the solid-state drive?
• 4, How to install the system on the solid-state drive?
• 5、How to install the system on solid-state drive
• 6, Do I have to reinstall the system after installing the solid-state drive?

How to set up the system disk on the solid-state drive?

1, enter the BIOS interface, find the Boot option, and set the solid-state drive as the first boot item. Save the settings and exit, and the computer will restart automatically. Insert the installed USB flash drive or CD into the computer, restart the computer, and enter the installation interface. In the installation interface, select the solid-state drive for system installation.

2. We plug the pre-made USB disk boot disk into the computer, press DEL to enter the BIOS and set the USB disk startup. At startup, the USB disk startup menu will appear, and select "Run Cabbage WIN8PEx64 Enhanced Version".

3. The transmission speed of solid-state drives is much faster than that of ordinary hard disks, and it is generally used as a system disk installation system.

Do I have to reinstall the system after installing a solid-state drive on the computer?

Install a solid-state drive, if it is not for installing the system, but only as a data cache disk, then there is no need to reinstall the system, but very few people use a solid-state drive as a cache disk. To install the solid-state drive as a system disk, the system must be reinstalled. Although the system can be migrated, it is better to reinstall the system again.

We know that the operating system is installed on the hard disk, so in most cases, the solid-state drive needs to be reinstalled.

If you want to start up in 10 seconds, you must install the system in the solid-state drive. You just want to use it to play games. If you want to load faster when playing games, you don't need to install the system in the solid-state drive. The SATA mode of the solid-state drive is preferably the AHCI mode; the solid-state drive partition must be aligned in 4K, otherwise it will affect the performance.

No need. There is no need to reinstall the system to change the interface position of the system disk (m2 solid state).

How to install the system on the solid-state drive?

Preparation: - Hardware: Purchase a solid-state drive suitable for your model. - Software: Prepare an operating system installation media that can be installed, such as Windows 10 installation CD or USB drive.Backup data: It is recommended that you back up important data before any operation.

Prepare the installation media: First, you need to prepare an installation media containing the operating system, which can be a Windows installation disc or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

The transmission speed of solid-state drives is much faster than that of ordinary hard disks, and it is generally used as a system disk installation system.

When installing, you can format the SSD first with the requirements of the WINDOWS installer, so that the installed SSD will be automatically aligned 4K; PS: It is recommended that both SSD and hard disk should not be partitioned, just create folder management; noTO INSTALL THE GHOST VERSION OF THE WINDOWS SYSTEM, ONLY THE PURE VERSION OF WINDOWS SHOULD BE INSTALLED.

The installation method is the interface of the 5-inch SATA solid-state drive is the same as the interface of the mechanical disk. Put the solid-state disk on the hard disk rack (if it is not easy to install, buy a solid-state drive bracket), connect the data cable and power cable, and the solid-state drive can be used. Set up the master-sceept disk.

How to install the system on the solid-state drive?

The SATA interface of the solid-state drive is all SATA3, and the data cable and power cable are clearly separated.

Install the operating system: - Insert the operating system installation media into the computer and restart the computer. - Follow the instructions on the installation interface to install the operating system.During the installation process, select the solid-state drive as the installation target. Complete the installation: - After the installation is completed, restart the computer and start from the solid-state drive.

You can use the USB disk to install the system on the SSD: x0dx0a make a u boot USB disk to install the system on the solid-state drive, pay attention to 4k alignment.

How to install the system of solid-state drive

- Start the computer and enter the BIOS setting interface (usually press the Del, F2 or F10 key). - In the BIOS settings, find the boot tab and the solid-state The hard disk is set as the preferred boot device. Install the operating system: - Insert the operating system installation media into the computer and restart the computer.

Prepare to install the introductionQuality: First of all, you need to prepare an installation media containing the operating system, which can be a Windows installation disc or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

The installation method is the interface of the 5-inch SATA solid-state drive is the same as the interface of the mechanical disk. Put the solid-state disk on the hard disk rack (if it is not easy to install, buy a solid-state drive bracket), connect the data cable and power cable, and the solid-state drive can be used. Set up the master-sceept disk.

The transmission speed of solid-state drives is much faster than that of ordinary hard disks, and it is generally used as a system disk installation system.

If the SSD capacity is large enough, it is recommended to divide it into two disks, one onlyInstall a common application software in the system, so that it will be smoother and more comfortable to use, and the system disk is at least 60GB or more).

Do I have to reinstall the system after installing the solid-state drive?

1. It is not necessary to reinstall the system when replacing the solid-state drive. Solid State Disk (Solid State Drive, abbreviated as SSD), also known as a solid-state drive, is a hard disk made of a solid-state electronic memory chip array.

2. If you want to start up in 10 seconds, you must install the system in the solid-state drive. You just want to use it to play games. If you want to load faster when playing games, you don't need to install the system in the solid-state drive.The SATA mode of the solid-state drive is preferably the AHCI mode; the solid-state drive partition must be aligned in 4K, otherwise it will affect the performance.

3. If you want to use it as a system disk, you must reinstall the system.

4. First of all, whether you want to reinstall the system or migrate the system, remember to back up important data first. Reinstalling the system is relatively simple. Nowadays, there are too many one-click reinstallation tools on the Internet, such as "Big Tomato One-click Reinstall", but this can only be used when the system is available and networked.

5. Not necessarily. If your current hard disk system is good, you can directly use ghost software to clone to ssd to save time and not lose data.

6. A brand-new hard disk cannot be used directly. The hard disk needs to be partitioned before it can be used.Install a solid-state drive as a system disk, and the system must be reinstalled. Reinstalling the system means that it will be time-consuming and laborious to reinstall many software, and the genuine software may need to be reactivated if it is installed again.