Bingo Plus

List of the catalog of this article:

• 1, What will occur if the engine cylinder pad is broken
• 2, How to deal with oil seepage of Benley Red Dragon 150 engine cylinder block cushion
• 3、What is the name of the engine leather cushion

What will happen if the motive cylinder pad is broken

1. If the cylinder pad is damaged, it will lead to insufficient compression pressure of the engine cylinder, making the engine unstable, jitter and difficult to start, and unstable at high or low speed.Some cylinders do not work, the power is significantly reduced, and the exhaust pipe has a sudden, studling, studling sound when accelerating. At the same time, the sound of air leakage can sometimes be heard next to the engine.

2. There are many manifestations of broken engine cylinder pads, including engine cylinder head leakage, cylinder pressure reduction, oil and water leakage, gas entering the oil channel, waterway, etc. The engine cylinder head is leaking air.

3. The engine power is reduced, the driving is weak, and the acceleration is poor. The engine does not work smoothly, individual cylinders do not work, and even the engine shakes. The engine is difficult to start. Overflow and air leakage occur at the seam of the cylinder block and the cylinder head. The cylinder pad is burned between the oil channel and the waterway, and organic oil appears in the cooling water.

4. The following phenomenon will occur when the engine gasket is broken: air leakage between two adjacent cylinders.Under the premise of not opening the decompression, shake the crankshaft, and feel that the pressure of both cylinders is not enough.

5. Engine power declines, weak driving, and poor acceleration. The engine does not work smoothly, some cylinders do not work, and even the engine will vibrate. The engine is difficult to start. Overflow and air leakage occur at the seam of the cylinder block and the cylinder head.

How to deal with the oil seepage of the Benelli Red Dragon 150 engine cylinder block cushion

The most direct and effective way is to replace the sealing ring completely. The roads in urban areas are congested, and you need to keep changing when walking and stopping. Gear; Now there are more and more car gears, resulting in more gear changes, greater working pressure and higher temperature in the gearbox, which accelerates the aging and deformation of the rubber at the gearbox seal.

Are you sure it's cylinder gasket oil seepage? Because there are not many years and kilometers, the possibility of oil seepage in the cylinder pad will be relatively small. If the cylinder pad seeps oil, the maintenance needs to remove the cylinder head to replace the cylinder pad. It is very likely that the valve chamber cover cushion is seeping oil.

Da Da Da is generally caused by the collision between the valve foot and the valve head caused by the excessive valve gap. It will increase in frequency with the increase of the engine speed. If the gap is too high, the intake efficiency and exhaust efficiency of the engine will decrease, which will affect the performance of engine power and reduce fuel economy. If it is too big, you can go to the professional maintenance office to make it smaller.

First, remove the dust cover and pry off the spring with a screwdriver. Then take a closer look at the small groove mark on the oil seal. The groove is facing up, and the new oil seal is put in this direction. After renting, reinstall the spring and then install the dustproof cover. First, put the dustproof set on the outer tube, and then insert it into the inner tube.

The reason for the unstable idling speed of Benelli Red Baolong 150: Slight damage to the igniter or high-pressure package will cause unstable idle speed. If the engine of the motorcycle and the connection position of the carburer are damaged and there is air leakage, it will lead to unstable idle speed and cylinder leakage.

The airtightness of the air filter decreases, the gap between the parts and the valve is too large, the timing chain is loose, and the piston ring and cylinder block are excessively damaged will increase the engine noise.

What is the name of the engine leather mat

It is an anti-wear and shockproof mat, which mainly plays the function of anti-wear. If excessive wear is found, it should be replaced in time.

The foot glue is a rubber buffer block connected between the engine and the frame, which plays a role in reducing the vibration transmitted from the engine to the cockpit.

Dear, hello, the cushion on the front hood of the car is the hood insulation pad. Its function is to insult the heat of the dashboard in the car, and at the same time, it plays the role of noise reduction in the hood.

Metal asbestos pad is based on asbestos and outsource copper or steel. Some use braided steel wire or perforated steel plate as the skeleton, and some add metal rings around the cylinder hole to improve the strength.The advantage is that the price is low, but the strength is poor. Because asbestos has a carcinogenic effect on the human body, it has been discontinued in developed countries.

At present, the shock absorbers of cars cannot be softened and hardened. Unless you find a shock absorber that can be adjusted to soften and hard. Determine whether the shock absorber needs to be replaced according to the quality of the shock absorber.